Bz Postnet Bar Code - Oki LE850 Technical Reference

Z-mode manual
Hide thumbs Also See for LE850:
Table of Contents

Advertisement

8.23 ^BZ POSTNET BAR CODE

Format: ^BZo,h,f,g,t
o = Font rotation
N : 0°
R : 90°
I
: 180°
B : 270°
When omitted: Value of ^FW
* The point of origin differs depending on the coordinate designated in ^FT and ^FO.
h = Bar code height (in dots)
203-dpi printer: LE840
1 to 800 dots
300-dpi printer: LE850
1 to 1200 dots
When omitted: Value of ^BY
*1 If the value after dot-to-mm conversion exceeds 100 mm, it is corrected to 100 mm.
*2 If 0, a string, or other value is selected, it is corrected to 10 dots.
f = Print interpretation line
Y : Printed
N : Not printed
When omitted: N
g = Print interpretation line above code
Y : Printed
N : Not printed
When omitted: N
t = Postal code type
0 : Postnet bar code
1 : Plant Bar Code
2 : Reserved
3: USPS Intelligent Mail bar code
When omitted : 0
*1
In case of parameter t is set 0, While the 6th/8th/12th-digit or other data is also printed with Zebra,
only the 5th/9th/11th-digit data is printed with Oki Data (due to Oki Data specifications).
Since, for the purpose of use of POSTNET bar codes, the 5th/9th/11th-digit data are used, data for
digits other than 5th/9th/11th digit are not printed as bar codes.
*2
Data other than numeric values, if any, will be deleted.
*3
The character type of the interpretation line is independent of the module width value of ^BY. Font
A is used in any case.
*4
To print the interpretation line above code, the interpretation line parameter (parameter f) needs to
be set to "Y."
*5
If the command is sent without setting data (only ^FS and ^XZ are set while ^FD^FS and ^FD are
not set), the barcode will not be printed.
- 56 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Le840

Table of Contents