Table of Contents
Advertisement
8.51 ^GB GRAPHIC BOX
Format: ^GBw,h,t,c,r
w = Box width (in dots)
1 to 32000
When omitted: "Line width" in the default setting file
* If this exceeds the paper width, the end point in the X direction is adjusted to the paper size.
h = Box height (in dots)
1 to 32000
When omitted: "Line width" in the default setting file
* Since the maximum paper length is 1500 mm, even If this exceeds the paper length in Y direction,
only the data covered by the paper length are printed.
t = Line width (in dots)
1 to 32000
When omitted: "Line width" in the default setting file
c = Line color
B : Black
W : White
When omitted: B
r = Corner rounding
0 to 8
When omitted: 0
*1
With Oki Data, lines are thickened outward. Thus, for a box shape almost painted over with thick
lines, the size of the base box shape must be small. Therefore, the corner-rounding amount
calculated based on the base box shape is necessarily small and the corner-rounding amount for a
box shape with thick lines is not the same as that with Zebra.
*2
If the box width is set to a value exceeding the paper width, the end point in the X direction is
adjusted to the paper width. In this case, if the line width is set to a value exceeding 1 dot, printing
is performed beyond the paper width for the amount the right side of the box shape exceeds 1 dot
and the portion exceeding the head width is wrapped around for printing.
(Line width is used as box width is not specified in the file.)
(Line width is used as box height is not specified in the file.)
- 85 -
Advertisement
Table of Contents
