Table of Contents
Advertisement
8.27 ^CI CHANGE INTERNATIONAL FONT/ENCODING
Format: ^CIa,s1,d1,s2,d2,...
a = Setting font code
0 to 30 (14 to 17, 24 to 26, 29, and 30 are not supported)
0 : Single Byte Encoding - U.S.A. 1 Character Set
1 : Single Byte Encoding - U.S.A. 2 Character Set
2 : Single Byte Encoding - U.K. Character Set
3 : Single Byte Encoding - Holland Character Set
4 : Single Byte Encoding - Denmark/Norway Character Set
5 :Single Byte Encoding - Sweden/Finland Character Set
6 : Single Byte Encoding - Germany Character Set
7 : Single Byte Encoding - France 1 Character Set
8 : Single Byte Encoding - France 2 Character Set
9 : Single Byte Encoding - Italy Character Set
10 : Single Byte Encoding - Spain Character Set
11 : Single Byte Encoding - Miscellaneous Character Set
12 : Single Byte Encoding - Japan(ASCII with Yen symbol) Character Set
13 : Zebra Code Page 850
18 to 23: Reserved
27: Zebra Code Page 1252
28: Unicode (UTF-8 encoding) - Unicode Character Set
Default: "Character set" value in the default setting file
* When an unsupported font code (14 to 17, 24 to 26, 29, 30) is selected, the printer operates with
"0: Single Byte Encoding - U.S.A. 1 Character Set."
s1 = Source 1 (character output image)
0 to 255
d1 = Destination 1 (character input)
0 to 255
s2 = S ource 2 ( character output image )
0 to 255
d2 = D estination 2 ( character input )
0 to 255
*1
The characters that can be printed with ^CI0 to ^CI13 shall be included in Code Page 850.
Selecting a character which is not included in Code Page 850 results in blank.
*2
14 character sets, CI0 to CI13, can be remapped with the source and destination parameters.
Remapping of the other character sets is not supported.
*3
The remapping for the 257th and later pairs of source and destination is invalid.
*4
If the character set value is set to "Z1," this value is considered to be invalid and the bar code is
printed with the character set "0: U.S.A. 1.
*5
If an alphabet is entered first and then a number for the source value (e.g. Z65), the value is
considered to be invalid and the same print result is generated as when "0: U.S.A. 1" is selected" is
printed.
*6
To print TTF saved in USB, printing is performed with the code selected for this command.
- 60 -
Advertisement
Table of Contents
