Table of Contents
Advertisement
8.47 ^FT FIELD TYPESET
Format: ^FTx,y,z
x = X-coordinate (in dots)
0 to 32000
When omitted: If text/bar code drawing is performed right before, the X-coordinate at the end of the
y = Y-coordinate (in dots)
0 to 32000
When omitted: If text/bar code drawing is performed right before, the X-coordinate at the end of the
z = Text justification
0 : Left
1 : Right
2 : Auto justification (unsupported)
When omitted: Value of ^FW
* If "2: Auto justification" is selected, operation is performed with "0: Left."
*1
While the individual position and size vary depending on whether the ^MU/^JM command is placed
before or after ^FO/^FT/^LH/^LS/^LL/^PW or other command with Zebra, the position and the size
vary per label with Oki Data.
*2
When X and Y-coordinates are omitted in printing strings, the start point is the coordinates at the
end of the previous drawing. However, printing with this processing after ^SN and ^SF is not
guaranteed.
*3
After ^FS is received, both X and Y-coordinates become 0.
*4
Right justification of bar codes is not enabled.
previous drawing is applied. Otherwise, 0.
previous drawing is applied. Otherwise, 0.
- 81 -
Advertisement
Table of Contents
