Table of Contents
Advertisement
8.86 ^LL LABEL LENGTH
Format: ^LLy
y = Label length
203-dpi printer: LE840
80 to 12000 dots (10.0 mm to 1500.0 mm)
300-dpi printer: LE850
118 to 17700 dots (10.0 mm to 1500.0 mm)
Default: "LABEL LENGTH" in the Z-MODE parameter
When omitted: Default: "LABEL LENGTH" in the Z-MODE parameter
*1
While the individual position and size vary depending on whether the ^MU/^JM command is placed
before or after ^FO/^FT/^LH/^LS/^LL/^PW or other command with Zebra, the position and the size
vary per label with Oki Data.
*2
When "LABEL SIZE" in the Z-MODE parameter is set to 'DISABLE,' this command is ignored and
the value set in the Z-MODE parameter is used.
*3
While the paper length specified in this command becomes the printable area with Zebra, the
printable area with Oki Data is 2 mm shorter than the paper length specified in this command.
*4
Even when the automatic normal rotation waiting function is on, normal rotation waiting is not
performed with printing operation if the label length is set to 20 mm or shorter in this command.
If the label length is reset to 20 mm or longer, normal rotation waiting is not performed with printing
operation and overlapped printing may occur.
*5
If a value out of the range such as 0 and 100000 is entered, it is corrected to the
minimum/maximum value within the settable range.
*6: The recommended length is as follows:
10.0 mm to 177.8 mm (7 inches)
- 125 -
Advertisement
Table of Contents
