Sc Set Serial Communications - Oki LE850 Technical Reference

8.118 ^SC SET SERIAL COMMUNICATIONS

Format: ^SCa,b,c,d,e,f
a = Baud rate (Non-omissible)
2400, 4800, 9600, 19200, 38400, 115200
110, 300, 600, 1200, 14400, 28800, 57600 (unsupported)
b = Data length (in bits) (Non-omissible)
7, 8
c = Parity (Non-omissible)
N : None
E : Even
O : Odd
d = Stop bit
1, 2
e = Flow control (Non-omissible)
X : XON/OFF
D : DTR/DSR
R : READY/BUSY RTS
M : XON/READY AUTO
f = Zebra protocol (unsupported)
* This parameter is ignored.
* If an unsupported parameter of a value out of the range is selected, the previous setting is used as it is.
However, setting such as "data length: 70, stop bit: 10, parity: NNN, protocol mode: XXX" changes the
set values as the first byte is valid.
- 157 -