Bf Micropdf417 Bar Code; Bi Industrial 2 Of 5 Bar Code - Oki LE850 Technical Reference

8.12 ^BF MICROPDF417 BAR CODE

Format: ^BFo,h,m
o = Font rotation
N : 0°
R : 90°
I : 180°
B : 270°
When omitted: Value of ^FW
* The point of origin differs depending on the coordinate designated in ^FT and ^FO.
h = Bar code height (in dots)
203-dpi printer: LE840
1 to 80 dots
300-dpi printer: LE850
1 to 120 dots
When omitted: Value of ^BY
*1 If the value after dot-to-mm conversion exceeds 10 mm per module, it is corrected to 10 mm.
*2 If 0, a string, or other value is selected, it is corrected to 10 dots.
m = Mode
0 to 33
When omitted: N
*1 If the command is sent without setting data (only ^FS and ^XZ are set while ^FD^FS and ^FD are
not set), the barcode will not be printed.

8.13 ^BI INDUSTRIAL 2 OF 5 BAR CODE

Format: ^BIo,h,f,g
o = Font rotation
N : 0°
R : 90°
I : 180°
B : 270°
When omitted: Value of ^FW
* The point of origin differs depending on the coordinate designated in ^FT and ^FO.
h = Bar code height (in dots)
203-dpi printer: LE840
1 to 800 dots
300-dpi printer: LE850
1 to 1200 dots
When omitted: Value of ^BY
*1 If the value after dot-to-mm conversion exceeds 100 mm, it is corrected to 100 mm.
*2 If 0, a string, or other value is selected, it is corrected to 10 dots.
f = Print interpretation line
Y : Printed
N : Not printed
- 45 -