Wt Write (Encode) Tag - Oki LE850 Technical Reference

8.130 ^WT WRITE (ENCODE) TAG

Format: ^WTb,r,m,w,f,v
b = Block number
0 to n
When omitted: 0
r = Number of retries
0 to 10
When omitted: 0
* After read failure and void printing, the operation is repeated up to as many times as the value of
this parameter.
m = Print operation
0 : Print
1 : Not print
When omitted: 0
w = Write protect (unsupported)
* This parameter is ignored.
f = Format
0 : ASC II
1 : HEX
When omitted: 0
v = Error tag check
Y : Yes
N : No
When omitted: N
* Regarding the error tag check, if the RFID error tag detection in the Oki Data system mode is set to
'PASS,' this setting is ignored.
- 170 -