Seat Belt Inspection - Mitsubishi ASX 2019 Owner's Manual

Installing a child restraint sys-
tem to a 3-point type seat belt
(with emergency locking mech-
anism)
3-point type seat belt location
The child restraint system can be fitted by us-
ing the 3-point type seat belt at the below il-
lustrated seating position.
Installation:
1. Put a child restraint system on the seat in
which you wish to install it, and remove
the head restraint from the seat.
Refer to "Head restraints" on page 4-07.
CAUTION
l Do not remove the head restraint when in-
stalling a booster cushion.
2. Fasten the seat belt to secure the child
restraint system. Make sure you hear a
"click" when you insert the latch plate in
the buckle.
3. Use the locking clip to completely elimi-
nate any slackness.
4. Push and pull the child restraint in all di-
rections to be sure it is secure.
OGAE19E1

Seat belt inspection

WARNING
l For some types of child restraint, the lock-
ing clip (A) should be used to help avoid
personal injury during a collision or sud-
den manoeuvre.
It must be fitted and used in accordance
with the child restraint manufacturer's
instructions.
The locking clip must be removed when
the child restraint is removed.
Seat belt inspection
Check the belts for cuts, worn or frayed web-
bing and for cracked or deformed metallic
parts. Replace the belt assembly if it is defec-
tive.
Seat and seat belts
4
4-23