Mitsubishi ASX 2019 Owner's Manual page 392

Replacement of lamp bulbs
*: Front of the vehicle
2. Pull the bulb out of the socket.
10
3. To install the bulb, perform the removal
steps in reverse.
Front turn-signal lamps
To remove
10-28 Maintenance
1. Remove the upper cover.
For information regarding how to re-
move the upper cover, refer to "Remov-
ing and installing the upper cover and
duct" on page 10-09.
2. Remove the entire socket and bulb as-
sembly (A) by turning it anticlockwise.
*: Front of the vehicle
3. Remove the bulb by pulling it out.
OGAE19E1
To install
1. To install the bulb, perform the removal
steps in reverse.
2. Install the upper cover.
For information regarding how to install
the upper cover, refer to "Removing and
installing the upper cover and duct" on
page 10-09.
Side turn-signal lamps (on
fender)*
NOTE
l For the side turn-signal lamps (on fender), it
is not possible to repair or replace just the
bulb.
Contact a MITSUBISHI MOTORS Author-
ized Service Point when there is a need for
repair or replacement.
Side turn-signal lamps (on out-
side rear-view mirror)*
NOTE
l An LED, not a bulb, is used in the side turn-
signal lamps (on outside rear-view mirror).
Contact a MITSUBISHI MOTORS Author-
ized Service Point when there is a need for
repair or replacement.