Mitsubishi ASX 2019 Owner's Manual page 247

Loading a roof carrier
CAUTION
l Use a roof carrier that properly fits your ve-
hicle. Do not load luggage directly onto the
roof. For installation, refer to the instruction
manual accompanying the roof carrier.
l
When attaching/removing the roof carrier
and loading/removing luggage, do not apply
excessive pressure on a single point.
Depending on how and where the force is
applied, this may cause dents on the vehicle
roof.
NOTE
l We recommend you to use a genuine
MITSUBISHI roof carrier, since the brack-
ets to be used have a special shape.
For details, we recommend you to consult a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
Roof carrier mounting brack-
ets*
Type 1
When installing the roof carrier, use the
brackets (A).
The brackets (A) are located under each cov-
er (B).
Attaching the roof carrier
Slide each cover (B) towards the front of the
vehicle to remove it.
Refitting the covers
1. With each cover, put the tabs (C) on the
cover in the holes (D) in the roof.
OGAE19E1
2. Slide the cover (B) towards the rear of
the vehicle to install it.
Type 2
When installing the roof carrier, use the
brackets (A).
The brackets (A) are located under each roof
drip moulding (B).
Starting and driving
Cargo loads
6
6-77