Mitsubishi ASX 2019 Owner's Manual page 127

3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch in sequence from 1 (turn-
signal sound 1) → 2 (turn-signal sound
2) → 1 (turn-signal sound 1).
The setting changes to the selected turn-
signal sound.
Changing the momentary fuel
consumption display (Type 2)
It is possible to change the bar graph setting
of the momentary fuel consumption display.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)" on page 5-18.
2. Lightly press the multi-information me-
ter switch to select (changing the
momentary fuel consumption display)
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch in sequence from ON
(with the green bar graph) → OFF (with-
out the green bar graph) → ON (with the
green bar graph).
The setting changes to the selected bar
graph setting.
Returning to the factory set-
tings
Many of the function settings can be returned
to their factory settings.
OGAE19E1
Multi-information display
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)" on page 5-18.
2. Lightly press the multi-information me-
ter switch to select "RESET" (returning
to the factory settings).
Type 1
Type 2
3. When you press and hold the multi-in-
formation meter switch for about 5 sec-
onds or more, the buzzer sounds and all
of the function settings are returned to
the factory settings.
Instruments and controls
5
5-25