Combination headlamps and dipper switch
NOTE
The buzzer stops when the driver's door is
closed. (The warning is also displayed on the
multi-information display.)
The buzzer stops in the following manner.
Turn the lamp switch to the "OFF" posi-
•
tion.
5
•
Close the driver's door.
l
When the engine was started using the key-
less operation function, if the driver's door is
opened and the operation mode is put in
OFF, the lamp monitor buzzer sounds at a
high pitch intermittently.
The buzzer stops when the driver's door is
closed. (The warning is also displayed on the
multi-information display.)
The buzzer stops in the following manner.
•
Turn the lamp switch to the "OFF" posi-
tion.
•
Close the driver's door.
Lamp monitor buzzer
[When the engine was started using the key]
If the driver's door is opened when the key is
in the "LOCK" or "ACC" position or re-
moved from the ignition switch while the
lamps are on, a buzzer will sound to remind
the driver to turn off the lamps.
[When the engine was started using the key-
less operation function]
5-52
Instruments and controls
If the driver's door is opened when the opera-
tion mode is in ACC or OFF with the lamps
illuminated, a buzzer will sound to remind
the driver to turn off the lamps.
In both cases, the buzzer will automatically
stop if the auto-cutoff function is activated,
the lamp switch is turned off, or the door is
closed.
Daytime running lamps*
The daytime running lamps come on when
the engine is running and the lamp switch is
in the "OFF" or "AUTO" position and the tail
lamps are off.
NOTE
l
If the lamp switch is in the "
position, or if the tail lamps are on when the
lamp switch is in the "AUTO" position, the
daytime running lamps come on as position
lamps.
OGAE19E1
Dipper (High/Low beam
change)
When the lamp switch is in the "
tion, the beam changes from high to low (or
low to high) each time the lever is pulled
fully (1). While the high-beam is on, the
high-beam indication lamp in the instrument
cluster will also illuminate.
" or "
"
Headlamp flasher
The high-beams flash when the lever is
pulled slightly (2), and will go off when it is
released.
When the high-beam is on, the high-beam in-
dication lamp in the instrument cluster will il-
luminate.
" posi-