Mitsubishi ASX 2019 Owner's Manual page 302

®
Bluetooth 2.0 interface*
3. If you have completed a speaker enroll-
ment process once already, the voice
guide will say either "Enrollment is ena-
bled. Would you like to disable or re-
train?" or "Enrollment is disabled.
Would you like to enable or retrain?"
4. When enrollment is "enabled", the voice
model is on; when enrollment is "disa-
bled", the voice model is off. Say the
command that fits your needs.
Say "Retrain" to start the speaker enroll-
7
ment process and recreate a new voice
model. (Refer to "Speaker enrollment"
on page 7-51.)
Connecting the Bluetooth
interface and Bluetooth
vice
Before you can make or receive hands-free
calls or play music using the Bluetooth
interface function, you must pair the Blue-
®
tooth device and Bluetooth
7-52 For pleasant driving
NOTE
l Pairing is required only when the device is
used for the first time. Once the device has
been paired with the Bluetooth
face, you only need to bring the device into
the vehicle next time and the device will au-
tomatically connect to the Bluetooth
terface (if supported by the device). The de-
vice must have Bluetooth
connect.
Up to 7 Bluetooth
with the Bluetooth
If multiple paired Bluetooth
available in the vehicle, the cellular phone or
®
2.0
music player most recently connected is auto-
®
de-
matically connected to the Bluetooth
terface.
You can also change a Bluetooth
®
2.0
be connected.
®
2.0 interface. To pair
To pair a Bluetooth
®
tooth 2.0 interface, use either one of the fol-
lowing 2 methods (Type 1 or Type 2).
Pairing procedure- Type 1*
1. Stop your vehicle in a safe area, put the
gearshift lever in the "N" (Neutral) posi-
tion (M/T) or the selector lever in the
®
2.0 inter-
®
2.0 in-
®
turned ON to
®
devices can be paired
®
2.0 interface.
®
devices are
®
2.0 in-
®
device to
®
device with the Blue-
OGAE19E1
"P" (PARK) position (CVT) and pull the
parking brake lever.
NOTE
l
®
You cannot pair Bluetooth devices with the
®
Bluetooth 2.0 interface unless the vehicle is
parked. Before pairing a Bluetooth
®
with the Bluetooth 2.0 interface, confirm
that the vehicle is parked in a safe location.
2. Press the SPEECH button.
3. Say "Setup."
4. Say "Pairing options."
5. The voice guide will say "Select one of
the following: pair, edit, delete, or list."
Say "Pair."
NOTE
l If 7 devices have already been paired, the
voice guide will say "Maximum devices
paired" and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to "Selecting a device: Deleting a de-
vice" on page 7-55.)
6. The voice guide will say "Please say a 4-
digit pairing code." Say a 4-digit num-
ber.
When the confirmation function is on,
the system will confirm whether the
®
device