Mitsubishi ASX 2019 Owner's Manual page 304

®
Bluetooth 2.0 interface*
NOTE
l
The following procedure (
be used instead of saying "Pair Device." Re-
place this step 3 with the following proce-
dure if you prefer.
Say "Setup."
Say "Pairing Options."
The voice guide will say "Select one of
the following: pair, edit, delete, or list."
Say "Pair."
l
If 7 devices have already been paired, the
7
voice guide will say "Maximum devices
paired" and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to "Selecting a device: Deleting a de-
vice" on page 7-55.)
4. The voice guide will say "Start pairing
procedure on the device. See the device
manual for instructions." and then will
say "The pairing code is <pairing
code>."
NOTE
l
®
Some Bluetooth devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements and read
the next section "If your device requires a
specific pairing code" on page 7-52.
7-54 For pleasant driving
NOTE
l The pairing code entered here is only used
to ) can also
for the Bluetooth
Depending on the connection settings of the
®
Bluetooth
entered each time you connect the Blue-
®
tooth device to the Bluetooth
face. For the default connection settings, re-
fer to the instructions for the device.
5. Enter in the Bluetooth
it number that has been read out in Step
4.
NOTE
l
Depending on the Bluetooth
take a few minutes to pair it with the Blue-
®
tooth 2.0 interface.
l
If the Bluetooth
nize the Bluetooth
will say "Pairing has timed out" and the
pairing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
®
connection certification.
device, this code may have to be
®
2.0 inter-
®
device the 4-dig-
®
device, it may
®
2.0 interface cannot recog-
®
device, the voice guide
®
, and try pairing it again.
OGAE19E1
NOTE
l If you enter the wrong number, the voice
guide will say "Pairing failed" and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
If your device requires a specific pairing
code, you need to set the pairing code. Refer
to the device manual for pairing code re-
quirements and read the next section "If
your device requires a specific pairing code"
on page 7-52.
6. The voice guide will say "Please say the
name of the device after the beep." You
can assign a desired name for the Blue-
®
tooth device and register it as a device
tag. Say the name you want to register
after the beep.
NOTE
l When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?" An-
swer "Yes."
To change the device tag, answer "No" and
then say the device tag again.