Mitsubishi ASX 2019 Owner's Manual page 144

Indication lamp, warning lamp, and information screen display list
Screen type 1
—
5
Other interrupt displays
Screen type 1
––
––
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details.
5-42 Instruments and controls
Screen type 2
l There is a fault in the Auto-
matic High-Beam (AHB) sys-
tem.
Screen type 2 System operation status
l When starting the engine, you
pressed the engine switch
without depressing the clutch
pedal (M/T).
l
When starting the engine, the
selector lever is in a position
other than the "P" (Park) or
the "N" (Neutral) position, or
you pressed the engine switch
without depressing the brake
pedal (A/T or CVT).
OGAE19E1
Cause Solution (Reference)
l We recommend you to con-
sult
MOTORS Authorized Service
Point.
Refer to "System problem
warning" on page 5-55.
l On vehicles with M/T, place
the gearshift lever in the "N"
(Neutral) position, fully de-
press the clutch pedal, depress
the brake pedal with the right
foot. Then, press the engine
switch. Refer to "Starting and
stopping the engine" on page
3-17.
l
On vehicles with A/T or CVT,
place the selector lever in the
"P" (PARK) position, depress
the brake pedal with the right
foot. Then, press the engine
switch. Refer to "Starting and
stopping the engine" on page
3-17.
a MITSUBISHI
Reference