Mitsubishi ASX 2019 Owner's Manual page 164

Wiper and washer switch
The wipers will operate once if the wiper lev-
er is raised to the "MIST" position and re-
leased. This operation is useful when it is
drizzling, etc. The wipers will continue to op-
erate while the lever is held in the "MIST"
position.
5
Vehicles with rain sensor
The windscreen wipers can be operated with
the ignition switch or the operation mode is
in ON or ACC.
5-62 Instruments and controls
If the blades are frozen to the windscreen or
rear window, do not operate the wipers until
the ice has melted and the blades are freed,
otherwise the wiper motor may be damaged.
MIST- Misting function
The wipers will operate once.
OFF- Off
AU- Auto-wiper control
TO- Rain sensor
The wipers will automatically oper-
ate depending on the degree of wet-
ness on the windscreen.
LO- Slow
HI- Fast
Rain sensor
Can only be used when the ignition switch or
the operation mode is in ON.
OGAE19E1
If the lever is put in the "AUTO" position,
the rain sensor (A) will detect the extent of
rain (or snow, other moisture, dust, etc.) and
the wipers will operate automatically.
Keep the lever in the "OFF" position if the
windscreen is dirty and the weather is dry.
Wiper operation under these conditions can
scratch the windscreen and damage the wip-
ers.
CAUTION
l With the ignition switch or the operation
mode in ON and lever in the "AUTO" posi-
tion, the wipers may automatically operate
in the situations described below.
If your hands get trapped, you could suffer
injuries or the wipers could malfunction. Be
sure to turn the ignition switch to the
"LOCK" position or put the operation mode
in OFF, or move lever to the "OFF" position
to deactivate the rain sensor.