Mitsubishi ASX 2019 Owner's Manual page 207

ABS warning lamp/display
Warning lamp
Warning display type 1
Warning display type 2
If there is a malfunction in the system, the
ABS warning lamp will come on and the
warning display will appear on the informa-
tion screen in the multi-information display.
Under normal conditions, the ABS warning
lamp only comes on when the ignition switch
is turned to the "ON" position or the opera-
tion mode is put in ON and goes off a few
seconds later.
CAUTION
l Any of the following indicates that the ABS
is not functioning and only the standard
brake system is working. (The standard
brake system is functioning normally.) If this
happens, we recommend you to have your
vehicle inspected as soon as possible.
• When the ignition switch is turned to the
"ON" position or the operation mode is
put in ON, the warning lamp does not
come on or it remains on and does not go
off.
• The warning lamp comes on while driv-
ing.
The warning display appears while driv-
•
ing.
If the warning lamp/display il-
luminate while driving
If only the ABS warning lamp/
display illuminate
Avoid hard braking and high-speed driving.
Stop the vehicle in a safe place.
Restart the engine and check to see whether
the lamp goes out after a few minutes driv-
ing; if it then remains off during driving,
there is no problem.
However, if the warning lamp/display do not
disappear, or if they come on again when the
vehicle is driven, we recommend you to have
the vehicle checked.
OGAE19E1
Anti-lock brake system (ABS)
If the ABS warning lamp/
display and brake warning
lamp/display illuminate at the
same time
Warning lamp
Warning display type 1
Warning display type 2
The ABS and brake force distribution func-
tion may not work, so hard braking could
make the vehicle unstable.
Avoid hard braking and high-speed driving.
Stop the vehicle in a safe place and we rec-
ommend you to have it checked.
Starting and driving
6
6-37