Receiving Calls - Mitsubishi ASX 2019 Owner's Manual

NOTE
l If you say "No" to all names read by the sys-
tem, the voice guide will say "Name not
found, returning to main menu" and the sys-
tem will return to the main menu.
5. If only one telephone number is regis-
tered under the name you just said, the
voice guide proceeds to Step 6.
If two or more telephone numbers are
registered that match the name you just
said, the voice guide will say "Would
you like to call <name> at [home],
[work], [mobile], or [other]?" Select the
location to call.
NOTE
l If the name you selected has matching data
in the vehicle phone book but no telephone
number is registered under the selected loca-
tion, the voice guide will say "{home/work/
mobile/other} not found for <name>. Would
you like to add location or try again?"
Say "Try again," and the system will return
to Step 3.
Say "Add location" and you can register an
additional telephone number under the selec-
ted location.
NOTE
l If the name you selected has matching data
in the mobile phone book but no telephone
number is registered under the selected loca-
tion, the voice guide will say "{home/work/
mobile/other} not found for <name>. Would
you like to try again?"
Answer "Yes," and the system will return to
Step 3.
Answer "No," and the call will be cancelled.
Start over again from Step 1.
6. The voice guide will say "Calling
<name> <location>" and then the sys-
tem will dial the telephone number.
NOTE
l When the confirmation function is on, the
system will ask if the name and location of
the receiver are correct.
If the name is correct, answer "Yes."
If you want to change the name or location
to call, answer "No." The system will return
to Step 3.
Redialing
You can redial the last number called, based
on the history of dialed calls in the paired cel-
lular phone.
Use the following procedure to redial.
1. Press the SPEECH button.
2. Say "Redial."
OGAE19E1
®
Bluetooth 2.0 interface*
SEND function
During a call, press the SPEECH button to
enter voice recognition mode, then say
"<numbers> SEND" to generate DTMF
tones.
For example, if during a call you need to sim-
ulate the press of a phone button as a re-
sponse to an automated system, press the
SPEECH button and speak "1 2 3 4 pound
SEND" and the 1234# will be sent on your
cellular phone.

Receiving calls

If an incoming phone call is received while
the ignition switch or the operation mode is
in ON or ACC, the audio system will be au-
tomatically turned on and switched to the in-
coming call, even when the audio system was
originally off.
The voice guide announcement for the in-
coming call will be output from the front pas-
senger's seat speaker.
If the CD player or radio was playing when
the incoming call was received, the audio
system will mute the sound from the CD
player or radio and output only the incoming
call.
To receive the call, press the PICK-UP button
on the steering wheel control switch.
When the call is over, the audio system will
return to its previous state.
For pleasant driving
7
7-59