Mitsubishi ASX 2019 Owner's Manual page 126

Multi-information display
2. Lightly press the multi-information me-
ter switch to select "ALARM" (rest time
setting).
Type 1
5
Type 2
5-24 Instruments and controls
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to display "ALARM" (rest time
setting).
Type 1 Type 2
4. Lightly press the multi-information me-
ter switch to select the time until the dis-
play.
5. Press and hold the multi-information
meter switch for about 2 seconds or
more, the setting is changed to the selec-
ted time.
NOTE
l If the battery is disconnected, the unit setting
is erased from memory and is automatically
set to OFF.
l
The drive time is reset when the ignition
switch is turned off or the operation mode is
put in OFF.
OGAE19E1
Changing the turn-signal sound
It is possible to change the turn-signal sound.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)" on page 5-18.
2. Lightly press the multi-information me-
ter switch to select (changing the
turn-signal sound).
Type 1
Type 2