Brake Pedal - Mitsubishi ASX 2019 Owner's Manual

Cruise control*
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
6
To slow down your speed in small amounts,
push down the SET - switch for less than
about 1 second and release it.
Each time you push down the SET - switch,
your vehicle will slow down by about
1.6 km/h (1 mph).
6-44 Starting and driving

Brake pedal

While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the SET - switch (B) and re-
lease the switch momentarily to set a new de-
sired cruising speed.
OGAE19E1
To temporarily increase or de-
crease the speed
To temporarily increase the
speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
l In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to "To activate" on page 6-42 and re-
peat the speed setting procedure.
To temporarily decrease the
speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the RES + switch (C).