Mitsubishi ASX 2019 Owner's Manual page 256

Heater/Air conditioning
NOTE
l On vehicles with the automatic air condi-
tioning, when the mode selection dial or the
blower speed selection dial is set to the
"AUTO" position again after manual opera-
tion, the air selection dial will also be auto-
matically controlled.
l On vehicles with the automatic air condi-
tioning, when the engine coolant tempera-
ture rises to a certain level, the air selection
is automatically switched to the recirculation
7 position and the indication lamp (A) comes
on. At this time, the system will not switch
to the outside position even if the air selec-
tion switch is pushed.
Customizing the air selection
Functions can be changed as desired, as sta-
ted below.
l Enable automatic air control
• Heater/Manual air conditioning:
When the system operates, the air se-
lection switch will be automatically
controlled.
• Automatic air conditioning:
When the mode selection dial or
blower speed selection dial is turned
to the "AUTO" position, the air selec-
tion switch is also controlled automat-
ically.
l Disable automatic air control
7-06 For pleasant driving
• Heater/Manual air conditioning:
Even when the system operates, the
air selection switch will not be auto-
matically controlled.
• Automatic air conditioning:
Even when the mode selection dial or
blower speed selection dial is turned
to the "AUTO" position, the air selec-
tion switch is not controlled automati-
cally.
l Setting change method
Hold down the air selection switch for
about 10 seconds or more.
When the setting is changed, a sound is
emitted and the indication lamp flashes.
• When the setting is changed from ena-
ble to disable 3 sounds are emitted and
the indication lamp flashes 3 times.
• When the setting is changed from dis-
able to enable 2 sounds are emitted
and the indication lamp flashes 3
times.
NOTE
l
The factory setting is "Enable automatic air
control."
l When the mode selection dial is turned to
" ", in order to prevent misting of the
windows the ventilator automatically
switches to outside air even if "Disable auto-
matic air control" is set.
OGAE19E1
Air conditioning switch (Air
conditioning)
Push the switch to turn the air conditioning
on, indication lamp (A) will come on.
There is a sound each time the switch is
pressed.
Manual air conditioning Automatic air conditioning
Push the switch again to switch it off.
NOTE
l If a problem is detected in the air condition-
ing system, the air conditioning operation in-
dication lamp (A) blinks. Press the air condi-
tioning switch once to turn it off, then once
more to turn it back on. If the air condition-
ing operation indication lamp does not blink
for a while, there is nothing wrong. If it
starts to blink again, we recommend you to
have it checked.