Seat Belt Inspection - Mitsubishi ECLIPSE CROSS 2017 Owner's Manual

Seat belt inspection

To install
1. Put a child restraint system on the seat in
which you wish to install it, and remove
the head restraint from the seat.
Refer to "Head restraints" on page 4-05.
4
CAUTION
l Do not remove the head restraint when in-
stalling a booster cushion.
2. When installing a child restraint system
in the front passenger seat or rear seat,
adjust the seat slide to its most rearward
position.
3. Route the belt through the child restraint
according to the child restraint system
manufacturer's instructions, then insert
the latch plate into the buckle.
4. Use the locking clip to completely elimi-
nate any slackness.
4-24 Seats and seat belts
WARNING
l
For some types of child restraint, the lock-
ing clip (A) should be used to help avoid
personal injury during a collision or sud-
den manoeuvre.
It must be fitted and used in accordance
with the child restraint manufacturer's
instructions.
The locking clip must be removed when
the child restraint is removed.
5. If your child restraint system has a sup-
port leg, make sure that there is a sup-
port leg at the stable position on the
floor.
6. Before putting the child in the restraint,
push and pull the restraint in all direc-
tions to be sure it is secure. Do this be-
fore each use.
OGKE18E1
To remove
Remove the plate from the buckle, then re-
move the seat belt from the child restraint
system.
Seat belt inspection
Check the belts for cuts, worn or frayed web-
bing and for cracked or deformed metallic
parts. Replace the belt assembly if it is defec-
tive.
WARNING
l
We recommend you to have all seat belt
assemblies including retractors and at-
taching hardware inspected after any col-
lision. We recommend that seat belt as-
semblies in use during a collision be re-
placed unless the collision was minor and
the belts show no damage and continue to
operate properly.
l Do not attempt to repair or replace any
part of the seat belt assemblies; we recom-
mend you to have this work done by a
MITSUBISHI MOTORS
Service Point. Incorrect repair or replace-
ment could reduce the effectiveness of the
belts and could result in serious injury in
the event of a collision.
E00406301690
Authorized