Mitsubishi ASX 2019 Owner's Manual page 112

Multi-information display
Information screen (when the
ignition switch or the operation
mode is ON)
Each time you lightly press the multi-infor-
mation meter switch, the display screen
switches in the following order.
5
Type 1
When there is no warning display
When there is a
warning display
Type 2
When there is no warning display
When there is a
warning display
1- Odometer (Type1)/Tripmeter
2- Odometer (Type1)/Tripmeter
5-10 Instruments and controls
3- Service reminder
4- Engine coolant temperature display
(Type 1)
5- Driving range display (Type 1)
6- Average speed display, average fuel con-
sumption display, momentary fuel con-
sumption display (Type 1)
7- Driving range display, momentary fuel
consumption display (Type 2)
8- Average fuel consumption display, mo-
mentary fuel consumption display (Type
2)
9- Average speed display, momentary fuel
consumption display (Type 2)
10- Function setting screen
11- Redisplay of a warning display screen
NOTE
l While driving, even if you operate the multi-
information meter switch, the function set-
ting screen is not displayed. Always stop the
vehicle in a safe place before operating.
Refer to "Changing the function settings
(when the ignition switch or the operation
mode is ON)" on page 5-18.
l When there is information to be announced,
such as a system fault, the buzzer sounds
and the screen display is switched.
Refer to "Interrupt display screen (when the
ignition switch or the operation mode is
ON)" on page 5-14.
OGAE19E1
Odometer/Tripmeter
Type 2
Type 1
The operation method is the same as when
the ignition switch or the operation mode is
OFF.
Refer to "Odometer/Tripmeter" for further
details on page 5-06.