Mitsubishi ASX 2019 Owner's Manual page 147

The setting for rest interval can be changed.
Screen type 1
Indication lamp, warning lamp, and information screen display list
Screen type 2
Stop the vehicle in a safe place, turn off the engine, and take a rest.
Use this display as rough guide for taking rests during a long drive.
The interval from the start of your trip until this message is displayed
can be set.
Refer to "Changing the function settings (when the ignition switch or
the operation mode is ON)" on page 5-18.
The display and buzzer alert the driver when the set time is reached. If
you continue to drive without having a rest, the buzzer sounds about
every 5 minutes to encourage you to take a rest.
l In the following cases, the time driven is reset and the display re-
turns to the previous display screen. After this, when the set time
is reached again, the buzzer and display encourage you to take a
rest.
• The buzzer sounds 3 times.
• Turn the ignition switch to the "LOCK" position or put the op-
• The multi-information meter switch is held for about 2 seconds
OGAE19E1
Solution
eration mode in OFF.
or more.
Instruments and controls
5
5-45