Mitsubishi ASX 2019 Owner's Manual page 122

Multi-information display
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)" on page 5-18.
2. Lightly press the multi-information me-
5
ter switch to select "AVG" (average fuel
consumption and average speed setting).
Type 1
Type 2
5-20 Instruments and controls
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch in sequence from A or 1
(Auto reset mode) → M, 2 or P (Manual
reset mode) → A or 1 (Auto reset
mode).
The setting is changed to the selected
mode condition.
Manual reset mode
l When the average fuel consumption and
average speed are being displayed, if
you hold down the multi-information
meter switch, the average fuel consump-
tion and average speed displayed at that
time are reset.
l
When the following operation is per-
formed, the mode setting is automatical-
ly switched from manual to auto.
[Except vehicles equipped with keyless
operation system]
Turn the ignition switch from the "ACC"
or "LOCK" position to the "ON" posi-
tion.
[For vehicles equipped with the keyless
operation system] Change the operation
mode from ACC or OFF to ON.
Switching to auto occurs automatically.
If switching to manual mode is done,
however, the data from the last reset is
displayed.
OGAE19E1
Auto reset mode
l When the average fuel consumption and
average speed are being displayed, if
you hold down the multi-information
meter switch, the average fuel consump-
tion and average speed displayed at that
time are reset.
l When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display and
average speed display are automatically
reset.
[Except vehicles equipped with keyless
operation system]
The ignition switch is in the "ACC" or
"LOCK" position for about 4 hours or
longer.
[For vehicles equipped with keyless op-
eration system]
The operation mode is in ACC or OFF
for about 4 hours or longer.
NOTE
l The average fuel consumption display and
average speed display can be reset individu-
ally for the auto reset mode and manual reset
mode.
l The memory of the auto reset mode or man-
ual reset mode for the average fuel con-
sumption display and average speed display
is erased if the battery is disconnected.