Mitsubishi ASX 2019 Owner's Manual page 108

Multi-information display
3- Service reminder
4- Redisplay of a warning display screen
Odometer/Tripmeter
Each time you lightly press the multi-infor-
mation meter switch, the display screen
switches.
5
Odometer/Tripmeter
meter → Service reminder → Redisplay
of a warning display screen → Odometer/
Tripmeter
Odometer
The odometer indicates the distance travel-
led.
Tripmeter
The tripmeter indicates the distance travelled
between two points.
Example usage of tripmeter
It is possible to measure two currently
travelled distances, from home using
tripmeter and from a particular point
on the way using tripmeter
5-06 Instruments and controls
To reset the tripmeter
To return the display to 0, hold down the
multi-information meter switch for about 2
seconds or more. Only the currently dis-
played value will be reset.
Example
If tripmeter
→ Odometer/Trip-
will be reset.
Type 1
Type 2
and tripmeter
.
is displayed, only tripmeter
OGAE19E1
NOTE
l If there is no warning display, the switching
sequence is: Odometer/Tripmeter
Odometer/Tripmeter → Service remind-
er → Odometer/Tripmeter .
l
Both tripmeters and can count up to
9999.9 km (9999.9 miles).
When a tripmeter goes past 9999.9 km
(9999.9 miles), it returns to 0.0 km
(0.0 miles).
l
When disconnecting the battery terminal, the
memories of tripmeter display
play are erased, and their displays return
to 0.0 km (0.0 miles).
Service reminder
This displays the distance
and number of months until
Type 1
the next periodic inspection.
Refer to "Service reminder"
on page 5-16.
Type 2
→
and dis-