Mitsubishi ASX 2019 Owner's Manual page 342

Tyre repair kit*
NOTE
8
l When removing and screwing in the valve
insert using the valve remover, turn the
valve remover by hand. Using a tool to turn
the valve remover could damage it.
8-10 For emergencies
12. After injecting the sealant, securely fit
the valve remover (E) into the end of the
filler hose (J) to prevent sealant from
leaking from the empty bottle.
13. Pull out the compressor hose (K) from
the side of the tyre compressor, and then
securely attach the hose to the tyre valve
(D).
OGAE19E1
14. Place the compressor (L) with its air
pressure gauge (M) on top.
Pull out the compressor's power cord
(N), insert the plug on the cord into the
accessory socket or cigarette lighter
socket (O), and then turn the ignition
switch to "ACC" position or put the op-
eration mode in ACC. Refer to "Ciga-
rette lighter" on page 7-71 and "Acces-
sory socket" on page 7-72.
Turn ON the compressor switch (P) and
inflate the tyre to the specified pressure.
(Refer to "Tyre inflation pressures" on
page 10-11.)