Mitsubishi ASX 2019 Owner's Manual page 121

Refer to "Information screen (when the
ignition switch or the operation mode is
ON)" on page 5-10.
Type 1 Type 2
CAUTION
l For safety, stop the vehicle before operating.
While driving, even if you operate the multi-
information meter switch, the function set-
ting screen is not displayed.
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Type 1
Type 2
NOTE
l To return the menu screen to the function
setting screen, press and hold the multi-in-
formation meter switch for about 2 seconds
or more.
l If no operations are made within about 15
seconds of the menu screen being displayed,
the display returns to the function setting
screen.
4. Select the item to change on the menu
screen and change to the desired setting.
Refer to the following items for further
details on the operation methods.
Refer to "Changing the reset mode for
average fuel consumption and average
speed" on page 5-19.
OGAE19E1
Multi-information display
Refer to "Changing the fuel consump-
tion display unit" on page 5-21.
Refer to "Changing the temperature
unit" on page 5-22.
Refer to "Changing the display lan-
guage" on page 5-22.
Refer to "Operation sound setting" on
page 5-23.
Refer to "Changing the time until
"REST REMINDER" is displayed" on
page 5-23.
Refer to "Changing the turn-signal
sound" on page 5-24.
Refer to "Changing the momentary fuel
consumption display" on page 5-25.
Refer to "Reset of low tyre pressure
warning threshold" on page 6-69
Refer to "Tyre ID set change" on page
6-69
Refer to "Returning to the factory set-
tings" on page 5-25.
Changing the reset mode for
average fuel consumption and
average speed
The mode conditions for the average fuel
consumption and average speed display can
be switched between "Auto reset" and "Man-
ual reset".
Instruments and controls
5
5-19