Plywood Base for a Wall with Wooden Studs
When installing a switch on a wall that has wooden studs, Allied Telesis
recommends installing it on a plywood base. (A plywood base is not
required for concrete walls.) Refer to Figure 53.
Wall Studs
Wall
Plywood Base
Figure 53. x330 Switch on a Wall with a Plywood Base
The plywood base should be mounted on two studs in the wall.
Recommended minimum dimensions of a plywood base for the x330-
20GTX and x330-28GTX Switches are listed here:
Width: 55.9 centimeters (22 inches)
Height: 50 centimeters (20 inches)
Thickness: 2.5 centimeters (1 inch)
x330 Series Installation Guide for Virtual Chassis Stacking
103