Basic Operation (Factory Setting) - Mitsubishi Electric FR-E700EX Instruction Manual

4.1.2

Basic operation (factory setting)

Operation mode switchover
At power-ON (External operation mode)
PU operation mode
(rotation speed monitor)
Parameter setting mode
parameter setting
Output current monitor
(Refer to page 51)
Parameter clear
Automatic PM parameter
initialization
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
While a fault is displayed:
The display shifts as follows by pressing
Output current Output voltage
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault history number.
PU Jog operation mode
Value change
STOP
Value change
All parameter
clear
(Refer to page 263)
is displayed.
: Rotation speed at the fault
Energization time.
Operation panel
(Example)
and speed flicker.
Speed setting has been
written and completed!!
Output voltage monitor
Display the
present setting
(Example)
Parameter and a setting value
flicker alternately.
Parameter write is completed!!
Faults history clear
Initial value
change list
4
49