Removal And Reinstallation Of The Cover; Front Cover; Wiring Cover - Mitsubishi Electric FR-E700EX Instruction Manual

Removal and reinstallation of the cover

1.3 Removal and reinstallation of the cover
1.3.1

Front cover

Removal (Example of FR-E720EX-0.75K)
Remove the front cover by pulling in the direction of arrow.
Reinstallation (Example of FR-E720EX-0.75K)
To reinstall, match the cover to the drive unit front and install it straight.
NOTE
 Fully make sure that the front cover has been reinstalled securely.
 The same serial number is printed on the capacity plate of the front cover and the rating plate of the drive unit. Since
these plates have the same serial numbers, always reinstall the removed cover onto the original drive unit.
1.3.2

Wiring cover

Removal and reinstallation
The cover can be removed easily by pulling. To reinstall, fit the cover to the drive unit along the guides.
Example of FR-E720EX-0.75K
6
Guide
Wiring cover