Startup Of Laser Marker - Panasonic LP-M Series Operation Manual

1-2-2 Startup of Laser Marker

1.
Turn ON ( | ) the key switch of the controller.
(Insert the key and turn it toward ON ( | ) side.)
The main indicator flashes in green, and changes into lighted-
up status after approx. 75 seconds.
Notice
• Since the ON/OFF operation of the key switch puts load to laser
marker, do not turn off the power supply until completing the
system start.
• In case of turning ON the power supply after turning OFF, leave
the interval at least 5 seconds between ON and OFF.
2.
If the language selection screen appears at the start-up,
select the language to be used for the display and press
[SET].
To skip this screen from the next start-up, check "Don't display this
massage on next start-up".
3.
The operation screen is appeared after the system is started.
16
Turn the key switch
toward ON ( | ) side
ME-LPMSZ-OP-7
MAIN
Flash in green
i
Light up in green