Environment Setting; Display Setting (Environment 1) - Panasonic LP-M Series Operation Manual

2-16 Environment Setting

This function is used for environment setting of laser marker and checks the status of system.
The setting parameters on this screen affect the settings on the other screens, operation or marking of character.
The settings here should be previously checked, or changed if necessary.

2-16-1 Display Setting (Environment 1)

Reference
• Setting of Environment 1 is saved without overwriting.
„ Operation Screen and Remote Screen
Description
1 Display mode :
Select the display of the operation screen between marking characters and marking image.
• Character: Refer to "2-3-1 Character Display" (P.82).
• Image: Refer to "2-3-2 Image Display" (P.83).
2 Update Function Character :
Select the updating on (Yes) / off (No) in the operation screen for the function character such as date, lot, counter.
3 Remote Screen :
Select the display of the operation screen under the remote control mode.
• Operation Screen: Refer to "2-3 Operation Screen" (P.82).
• I/O Check Monitor: Refer to "2-5-1 I/O Check Monitor" (P.89).
• File No. and File name
Reference
• When selecting "Image" for the operation screen and displaying the operation screen in the remote control mode, the
waiting time for the turning on the marking ready might become longer after editing the marking data or changing file No.
• When selecting "Yes" for the update of the function character, the idling time from the ending of the marking after
inputting trigger until the timing of the starting of the next marking might become longer.
1
3
ME-LPMSZ-OP-7
2
225