Panasonic LP-M Series Operation Manual page 41

5.
Set "0" (Auto) to [Version].
Reference
• For details on versions of QR codes, refer to "QR Code Version and Data Capacity" (P.287).
6.
Set "Alpha" (Alphanumeric) to [Mode].
Press [Mode] to switch display in the order of
"Alpha", "Binary", "Kanji", and "Numeric".
7.
Set "H" to [Err.Cor.] (Error Correction).
Press [Err. Cor.] to switch display in the order of "M",
"Q", "H", and "L".
8.
Set "0.500 mm" to [Module H.] (Module Height).
Set "0.500 mm" to [Module W.] (Module Width).
9.
Set "0.000 mm" to [X Pos.] (X Position).
Set "0.000 mm" to [Y Pos.] (Y Position).
ME-LPMSZ-OP-7
41