Mark On Uneven Figure - Panasonic LP-M Series Operation Manual

1-4-2 Mark on Uneven Figure

„ Sample
Difference in Level
(Height of Unevenness): 16 mm
Width: 40 mm
Marking Image
Original Point of Local Coordinate
(Center of 3D Figure)
Original Point of
World Coordinate
24mm
Marking Figure
Marking Logo File
„ Setting Flow
1. Set the uneven figure.
Set the size, angle, and center position of the uneven figure.
2. Set the marking Conditions.
Set the character type, logo type, character position, and logo position to be marked on the uneven figure.
58
Length: 8 mm
Length: 14 mm
24mm
Original Point of Local
Y
Coordinate
X
Setting of figure
[First Layer]
• Layer No. : 0
• Work Type : Plane
• Length : 14 mm
• Width : 40 mm
• Center X : 24 mm
• Center Y : 24 mm
• Center Z : 0 mm
Logo condition (First Layer) Character Condition (Second Layer)
• X Position : 0 mm
• Y Position : 0 mm
• X Scale : 0.75
• Y Scale : 0.75
Original Point of Local Coordinate
(Center of 3D Figure)
Original Point of
World Coordinate
24mm
-2mm
X Position, Y Position
(Character Condition)
ME-LPMSZ-OP-7
[Second Layer]
• Layer No.
• Work Type
• Length
• Width
• Center X
• Center Y
• Center Z
• Marking character
• Starting Coordinate X
• Starting Coordinate Y
• Character Height
• Character Width
• Character Interval
16mm
Z'
35mm
Marking Figure
Y
ABCD
-8mm
Original Point of
Local Coordinate
Marking Character
: 1
: Plane
: 8 mm
: 40 mm
: 24 mm
: 35 mm
: 16 mm
: ABCD
: -8 mm
: -2 mm
: 4 mm
: 3 mm
: 4 mm
X