Panasonic LP-M Series Operation Manual page 131

Description
2 Offset:
The whole screen is offset for each file.
Rotation Offset:
Rotates the object to the rotation direction around the original point.
Setting Range
X/Y Offset :
Shifts the marking position to the X/Y direction.
Setting Range
Z Offset (LP-M / LP-Z series only) :
Shifts the object to Z direction.
Setting Range
Notice
• The work distance adjusted with the Z-offset setting should conform with the actual distance from the head base to
the marking surface for the proper marking performance.
3 Overwriting Frequency :
Number of overwriting. The number of overwriting marking is specified by one trigger input.
Setting Range
Notice
• Overwriting marking and marking of bold character may affect the quality of marking. Check it by a trial before using
these functions.
• The function of overwriting is unavailable for the marking to flying object.
4 Overwriting Interval :
The interval period at overwriting is set.
Setting Range
5 Marking Pitch :
Common marking condition: Specifies the pitch of the marking lines for the bold character.
Common bar code condition: Specifies the pitch of the marking lines for the bar code and composite code.
Setting Range
Line Width of Bold Character
Reference
• The width of the bold line changes when the setting value on the "Line Width" is different from that marked with laser.
• This correction is invalid for logo data.
• It is recommended that the marking pitch is specified so that it is an integral multiple of half of the marking line width.
* For the setting range of the other model, refer to "Input Setting Value by Series" (P.296).
-180.00 to +180.00 degree (0.01 degree unit)
-60.000 to +60.000 mm (LP-M500 / LP-Z130)*
-45.000 to +45.000 mm (LP-S500)*
-22.000 to +22.000 mm (LP-M500)*
-25.000 to +25.000 mm (LP-Z130)*
1 to 9999 times
0.0 to 9.9 seconds or 0 to 60 seconds
0.010 to 2.000 mm
Marking Pitch
ME-LPMSZ-OP-7
Rotation (+)
Marking Pitch
Line Width of Bold Character
Rotation (-)
131