Character Conditions - Panasonic LP-M Series Operation Manual

2-10-2 Character Conditions

1
Description
1 Char. Cond. No. (Character Condition No.) :
Specifies the number of condition to be set.
Setting Range
2 Line No. :
Specifies the line number of character strings to be marked corresponding to the condition number.
Setting Range
3 Marking Shape :
Select from "Straight Line", "Proportional", "Justify", "Arc Outside (+)", or "Arc Outside(-)". The setting varies by
pressing this field.
4 Alignment :
Select from Center, Right, or Left. The setting varies by pressing this field.
5 Font :
Select the font from the registered character fonts. Refer to "2-15-4 Font File" (P.217).
The setting varies by pressing this field. Select the font to be used. The font can be selected for each condition
number.
2
3
4
5
6
7
8
1 to 99
1 to 99
ME-LPMSZ-OP-7
149