1-2 Operation Overview
This section describes the basic procedures to use laser marker from start-up to power off.
Flow:
1. Setup and connect the laser marker.
2. Startup of Laser Marker.
3. Set the marking data.
1. Select the file No.
2. Input the marking contents; characters, symbol code, logos, etc.
3. Set the marking layout; coordinates, size, etc.
4. Set the laser condition.
4. Radiate the laser.
1. Confirm the radiation position by the guide laser.
2. Radiate the laser for marking.
5. Save the marking data.
6. Turn off the power of the laser marker.
14
ME-LPMSZ-OP-7