Panasonic LP-M Series Operation Manual page 178

„ Circle
Description
1 Center X/Y (Center Point X/Y):
Specifies the Center point of the circle.
Setting Range
2 Radius:
Specifies the radius of the circle.
Setting Range
* For the setting range of the other model, refer to "Input Setting Value by Series" (P.296).
Setting example of the circle
178
1
2
-60.000 to +60.000 mm (LP-M500 / LP-Z130)*
-45.000 to +45.000 mm (LP-S500)*
0.010 to 60.000 mm (LP-M500 / LP-Z130)*
0.010 to 45.000 mm (LP-S500)*
Y [mm]
5
0
Center Point
(X,Y)=(5,5)
5
ME-LPMSZ-OP-7
Radius
X [mm]