Panasonic LP-M Series Operation Manual page 230

„ System Offset
This screen specifies the offset of marking position and laser power to the all registered files.
The functions are applicable to adjust the difference of laser power or displacement between laser marker and works in
case multiple production lines are used.
Item
3 Laser Power
Reference
• The laser power offset refers to the function to correct not the maximum laser power [W] value, but the laser power
setting value.
• "100" is specified if the value of "laser power (system offset)" × "laser power (laser setting)" is 100 or more.
4 Rotation Offset
5 X/Y Offset
Z Offset
(LP-M/LP-Z series
only)
Notice
• The work distance adjusted with the Z-offset setting should conform with the actual distance from the head base
to the marking surface for the proper marking performance.
6 X/Y Scale
* For the setting range of the other model, refer to "Input Setting Value by Series" (P.296).
Reference
• System offset is not offset on the image display.
• When marking data is inside of marking field on image display screen and the error "Existed marking data outside of
marking field" is displayed. Check the setting value in system offset.
230
Description
: Laser power offset. Offset the value of laser power set in each file.
Setting Range 50 to 200%
: Rotates the object to the rotation direction around the
original point.
Setting Range -180.00 to +180.00 degree
: Shifts the marking position to the X/Y direction.
-30.000 to +30.000 mm
Setting Range
(LP-M500/LP-S500)*
: Shifts the marking position to the Z direction.
-22.000 to +22.000 mm (LP-M500)*
Setting Range
-25.000 to +25.000 mm (LP-Z130)*
: Sets the offset scale of marking field (X and Y). Area is corrected by inputting
magnification.
Setting Range 70.000 to 130.000%
ME-LPMSZ-OP-7
Rotation (+) Rotation (-)