Usb Media; Registration File - Panasonic LP-M Series Operation Manual

2-15 USB Media

On this screen, data saved in the laser marker such as setting files, log and font files can be exported and deleted. It is also
possible to import externally saved data to the laser marker.
To import and export the data, use a USB media.
Notice
• Do not remove the USB media from USB connector during data write/read.
In addition, do not turn off the power supply of the main unit of laser marker during data write/read.
Any losses or failures of data might be caused. Please note that we shall not be liable for any losses incurred due to loss
or failure of data arising from use of this product.
• Do not insert/remove the USB media into/from the USB connector during marking, guide laser scanning or remote
control. The laser marker may get unstable or stop.
• Do not start the laser marker with the USB media being connected into the USB connector. The laser marker may not
start normally. Connect the USB media to the connector after the start-up is completed.
• Do not connect any other USB products for the purpose of data writing or reading than USB media to USB connector.
Performance of the laser marker might be failed. Before using a USB media, check it for compatibility with the laser
marker. We shall not be responsible for performance of all kinds of USB media.
• USB media with security features cannot be used.
• USB hub cannot be used for this product. Use USB media directly connecting to the laser marker.

2-15-1 Registration File

Registration files contain the marking data and conditions in one file number.
Up to 2048 registration files can be saved in a laser marker.
Item
1 TO MEDIA
2 FROM MEDIA
3 DEL REGIST
4 DEL MEDIA
5 File list
214
1 2
5
Description
Copies the selected file stored in the laser marker to the USB media.
Registers the selected file stored in the USB media to the laser marker.
Files in the backup data can also registered individually to the laser marker.
Deletes the selected file from the laser marker.
Select the file to delete and click "EXECUTE".
Deletes the selected file from the USB media.
Select the file to delete and click "EXECUTE".
Displays the all files stored in the laser marker.
Clicking the title line of the list, the files are sorted in ascending or descending order by
the following categories.
• File No.
• File name
• Modified date
3 4
ME-LPMSZ-OP-7