File; Comment - Panasonic LP-M Series Operation Manual

2-7 FILE

This screen is prepared for registering file into inner of laser marker and changing file No.
The file can be registered by two methods, overwriting and registering to other No. Registering in wrong method could
delete the content already registered. Take care of the registering method.

2-7-1 Comment

Register the file name into the laser marker with the following procedure. Each file can be registered the file name with the
following procedure.
1.
Press the character string of the Comments.
2.
Input the comment, and press [SET].
Refer to "2-8-2 Character Input" (P.104) for setting method.
Reference
• Characters that can be used for input are as follows:
Capital and small letters of alphabet, numerics, Katakana, Hiragana, Kanji (JIS level-1 and JIS level-2) symbols
• Up to 20 characters can be input in case of inputting all single-byte (ASCII) letter.
96
ME-LPMSZ-OP-7