Panasonic LP-M Series Operation Manual page 159

„ Code Type and Code Data
Code type
CODE39
ITF
CODE128
NW-7
EAN/UPC
GS1 DataBar
GS1 DataBar Limited
GS1 DataBar
Expanded
2D side of composite
code
QR code (Model 1)
QR code (Model 2)
Micro QR
Data Matrix (ECC200)
GS1 Data Matrix
Reference
[CODE128]
• Inputting the control code "FNC1" to the head of the barcode data, CODE128 changes to UCC/EAN128(GS1-128).
• In the case that "FNC1" is set at the head in CODE128 and 13-digit characters are inputted after "01", a check digit is
added at 14th digit automatically.
• The start code A, B, C for CODE128 is selected automatically depending on the content of the data.
[ITF]
• Add "0" at the head of data if the number of characters inputted including the check characters is odd.
[GS1 DataBar]
• RSS code and GS1 DataBar code are the same code.
• The supported standard of GS1 DataBar Limited is 2006 version of ISO/IEC 24724.
• For GS1 DataBar, GS1 DataBar Limited and those composite codes, input 13-figure numbers as the code data. In those
human readable text, "01" as AI in the head of the text and the check digit (modulus10/weight 3-1) in the end of the text
are indicated automatically.
Available characters
0 to 9, A to Z, space, symbols - + / $ % .
0 to 9
• Characters within ASCII Code 00 (HEX) to 7F (HEX): 0 to 9,
A to Z, a to z, symbols and control codes
• Function character (FNC1)
0 to 9, symbols - $ : / . +
0 to 9
The bar code to be generated is determined based on the
number of character inputted as shown below:
• EAN-13: Input by 12 figures without check digit.
• EAN-8: Input by 7 figures without check digit.
• UPC-A: Input by 11 figures without check digit.
• UPC-E: Input by 6 figures without check digit.
0 to 9
0 to 9, A to Z, a to z, symbols (! " % & ' ( ) * + , - . / : ; < = > ? _ ),
space, function character (FNC1)
• Number mode (1 byte character): 0 to 9
• Alphanumerical mode (1 byte character): 0 to 9, A to Z,
space, $ % * + - . / :
• Binary mode: Characters within ASCII Code 00 (HEX) to
7F (HEX), consisting of 0 to 9, A to Z, a to z, symbols and
control codes.
• Kanji mode (2 byte character): JIS level-1 and JIS level-2
within JIS code 2121 to 7426 (HEX)
• Binary mode: Characters within ASCII Code 00 (HEX) to
7F (HEX), consisting of 0 to 9, A to Z, a to z, symbols and
control codes.
• Kanji mode :JIS level-1 and JIS level-2 within JIS code 2121
to 7426 (HEX)
0 to 9, A to Z, a to z, symbols (! " % & ' ( ) * + , - . / : ; < = > ? _),
function character (GS)
ME-LPMSZ-OP-7
Number of characters
Max. 60 characters
6, 7, 11, or 12 digits
13 digits
Max. 60 characters
CC-A: Max. 56 characters
CC-B: Max. 255 characters
CC-C: Max. 255 characters
Max. 255 characters
159