Setting procedure of Rank function
1.
Press [RANK] after pressing [FUNCTION].
2.
Select [Parallel Input] from either 8 bit × 2 or 4 bit
× 4.
3.
Select Rank No.
• When Parallel Input is 8 bit × 2: 0 to 1
• When Parallel Input is 4 bit × 4: 0 to 3
4.
The character input window is appeared by
selecting marking character corresponding to I/O
connector No., and pressing [EDIT].
Input the character and press [SET].
• When Parallel Input is 8 bit × 2: 0 to 255
• When Parallel Input is 4 bit × 4: 0 to 15
ME-LPMSZ-OP-7
2
1
125