Table of Contents
Advertisement
OPERATION
NOTICE
•
Do not put anything other than DEF into the DEF tank. Foreign materials in DEF, such as dried urea
when you disconnect the hose and change the filter, may cause a malfunction of the equipment.
•
Do not paint the DEF injector or pump. Cover the pump and injector whenever you paint around
them.
•
Use only DEF which complies with the quality standards. If you add any additive agents, water, etc.
to DEF, the equipment will not operate correctly, and will not comply with the exhaust gas regula-
tions. It may also cause a failure in the engine system. If you supply a solution other than DEF, con-
tact Komatsu distributor.
To prevent deterioration of the aftertreatment devices, the ex-
haust gas temperature rises automatically, which is regenera-
tion. During regeneration, the aftertreatment devices regenera-
tion display (1) comes on in the indicator lamp.
When the engine is idled for long periods of time, regeneration
will occur more frequently. This is not an error in regeneration.
When regeneration performance caution lamp (2) comes on,
stop the machine in a safe area and start manual stationary re-
generation.
Depending on the urgency, two steps to request manual sta-
tionary regeneration are started.
Stop the engine during regeneration. Run the engine for about
5 minutes at low idling RPM.
When you press F6 on the main menu screen, the machine
monitor shows "Aftertreatment Devices Regeneration" screen
in the user menu.
WENAM00130
EXPLANATION OF COMPONENTS
RKA63260
RKA63270
3-133
Advertisement
Chapters
Table of Contents
