Komatsu PW118MR-11 Operation & Maintenance Manual page 127

OPERATION
Procedure for operation
1.
When the working mode selector switch is pressed, the
working mode selector screen is displayed on the monitor.
2.
Press function switches F3 or F4 at the bottom of the
screen or the working mode selector switch to change the
mode selection one at a time.
If no switch is touched for more than 5 seconds, the select-
ed working mode is automatically set as the working mode
and the screen changes to the one for steps 3 and 4.
REMARK
To return to the standard screen without changing the
working mode, press function switch F5.
3.
After selecting the desired mode, press function switch F6
and the mode is displayed in the center of the monitor dis-
play.
(Example: When the power mode is selected: "P")
4.
After 2 seconds, the working mode display at the top right
of the screen is highlighted in yellow.
5.
After 2 seconds, the screen returns to the standard screen.
The working mode display highlighted in yellow in step 4
returns to blue.
WENAM00130
EXPLANATION OF COMPONENTS
RKA61240
RKA61230
3-55