Komatsu PW118MR-11 Operation & Maintenance Manual page 203

OPERATION
The battery disconnect switch is used to cut out the electricity
from the battery.
This switch is located inside the compartment on the left side of
the machine.
Raise rubber cover (1), and the battery disconnect switch is
seen.
Act on the battery disconnection switch (S) when the system
operating lamp (2) is off.
(O)
OFF position: the switch key can be pulled out (and inserted)
and the current from the battery is cut out.
(I)
ON position: the battery current flows to the circuit.
Move the switch to this position prior to starting the machine.
SYSTEM OPERATING LAMP
System operating lamp (1) indicates that the controller mount-
ed on the machine is turned ON.
System operating lamp (1) lights up in green when the control-
ler is turned ON and goes out in a few minutes after the starting
switch is turned to OFF position.
Before operating the battery disconnect switch, check that sys-
tem operating lamp (1) is turned OFF.
WENAM00130
EXPLANATION OF COMPONENTS
RKA63120
RKA63130
S
RKA64970
RKA64971
3-131