Komatsu PW118MR-11 Operation & Maintenance Manual page 241

OPERATION
METHOD FOR OPERATIONS AND CHECKS BEFORE STARTING ENGINE
k k
• On starting the engine, check that the safety locking
lever is in the LOCK position. If the lock lever is not
locked securely and the control levers or control pedal
are touched when the engine is started, the machine
may move unexpectedly, and this may lead to serious
personal injury or death.
• Do not touch the left (C) and right (D) switches of the
joysticks to avoid that the neutral detection system
recognises the position resulting from the movement
as the neutral position.
1.
Check that battery disconnect switch (S) is in ON position
(I).
2.
Check that the safety locking lever (1) is in LOCK position
(L).
3.
Check that all control levers and control pedals are at
NEUTRAL position (N).
If the control levers and control pedals are not being
touched, they will be at NEUTRAL position (N).
4.
Check that the travel direction selection switch is in the
neutral position (N).
WARNING
WENAM00130
MACHINE OPERATIONS AND CONTROLS
RKA48660
RKA48650
RKA61630
3-169