Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
METHOD FOR FASTENING AND UNFASTENING SEAT BELT
•
Before fastening the seat belt, check that there is no problem in the belt mounting bracket or belt. If
it is worn or damaged, replace it.
•
Even if no problem can be seen in the belt, replace the seat belt every 3 years from starting usage
or 5 years after manufacture whichever comes sooner. The date of manufacture of the belt is shown
on the back of the belt.
•
Be sure to use the seat belt during operation.
•
Do not use the seat belt if it is twisted.
REMARK
•
The date indicated on the seat belt is the manufactured date. It is the start of the 5-year period. It is not the
start of the 3-year period of actual usage.
•
This seat belt has a winding device, so it is not necessary to adjust the length.
Fasten seat belt
1.
Hold grip (2) and pull out the belt from winding device (1).
2.
Check that the belt is not twisted, and then inset tongue (3)
into buckle (4) securely.
3.
Pull the belt lightly to check that it is properly locked.
Unfasten seat belt
•
Press button (5) in buckle (4) and remove tongue (3) from buckle (4).
•
Hold grip (2) and slowly return the belt into retractable device (1).
The belt retracts automatically.
REMARK
If the tongue is not inserted in the buckle, the seat belt
caution lamp is displayed at the top left of the monitor.
Fasten the seatbelt.
3-168
k
k
WARNING
WENAM00130
OPERATION
Advertisement
Chapters
Table of Contents
